COMPACT CONTAINERS. EXCLUSIVE PRINTABLE FILES.
← All storage guides

How to store filament on shelves

Filament boxes with colour-matched support rings on a wooden dowel rack

Start with the space you can actually use. Measure the clear width, depth and height, including any shelf lip or upright. Leave room to lift a box out without catching the one above it.

Stand them upright to see the labels

A closed box is 22 cm across and 8 cm deep. As a starting point, five boxes standing side by side take about 40 cm of shelf width and 22 cm of depth before you allow room for the printed rings and for lifting each box out. Measure one finished box with its ring and swatch fitted before planning a full shelf.

Print the support rings from the files supplied with your pack. A swatch card in the filament colour makes it easier to pick the right spool without opening the container.

Stack them flat on a narrower shelf

Five bare boxes stacked flat are about 40 cm high and need a footprint of roughly 22 × 22 cm. Keep the stack stable and low enough to lift comfortably. Put spools you reach for most often near the top.

Use a dowel rack if you already have one

Test one filled box with its ring on your rack. Check that it rests securely, clears the shelf above and can lift out easily. Use supports rated for the combined weight of the boxes and spools.

These setups are for passive storage. Dry damp filament separately before putting it away. Check your spool dimensions before ordering.

Ready to set up your shelf?
Choose a container pack with free tracked UK delivery.

Build your setup